FlowSource™ Transparency

Every ingredient goes through two verification stages before it reaches your bottle. First, each raw ingredient supplier performs identity, purity, potency, and contaminant testing at origin and provides a Certificate of Analysis documenting the results. Second, when the ingredients arrive at Vitaquest International in West Caldwell, New Jersey, their quality control team verifies the supplier documentation and performs a quality control check prior to encapsulation. No batch moves to encapsulation until every ingredient has cleared both stages. This layered approach means that by the time a capsule reaches your bottle, the ingredients inside have been tested at the supplier and verified again at the manufacturing facility before production begins.

FlowVeda^® is manufactured at a cGMP-certified facility in compliance with FDA 21 CFR Part 111. Individual ingredients carry their own supplier certifications including Kosher, Halal, Vegan, Non-GMO, Gluten-Free, Organic (KSM-66^®), and GRAS documentation. The distribution center is FDA registered. Complete certification documentation is maintained on file and available upon request.

Supplier relationships are maintained for consistency and quality. Each supplier has been vetted through documentation review, quality certification verification, and ongoing performance monitoring. Any supplier change requires a full re-evaluation of documentation, certifications, and quality controls.

FlowVeda^® sources ingredients from qualified suppliers across multiple countries. KSM-66^® Ashwagandha comes from organically cultivated roots in Rajasthan, India. Lion’s Mane and Rhodiola are sourced from Jiaherb with origin in China. Bacopa monnieri is sourced through Cepham Inc., manufactured by Chemical Resources in India. L-Theanine comes from Zhejiang, China. Vitamin B6 is manufactured by Jiangxi Tianxin Pharmaceutical in China. The HPMC capsule is manufactured by CapsCanada in Colombia and Canada. Specific supplier details for each ingredient are available in the FlowSource™ ingredient pages.

Yes. None of the ingredients in the FlowVeda^® formula are derived from animal sources, and all suppliers have provided documentation confirming BSE/TSE free status.

GRAS stands for Generally Recognized As Safe, an FDA classification. KSM-66^® Ashwagandha has a formal GRAS determination through an independent expert panel. L-Theanine references GRAS Notice GRN 000501. Other ingredients have GRAS statements based on established use history and available scientific evidence.

Several individual ingredients hold current Kosher and Halal certifications from their suppliers. Kosher certificates are on file for KSM-66^®, Folate (DCP), Lion’s Mane, Rhodiola, and L-Theanine. Halal certifications are on file for Vitamin B6 and NALT. Full product-level Kosher or Halal certification through the manufacturing facility follows a separate process involving rabbinical or Islamic authority inspection. Contact us for the most current certification status.

Yes. Allergen documentation is collected from every supplier. KSM-66^® Ashwagandha provides a comprehensive allergen statement confirming absence of all major allergens including milk, eggs, fish, shellfish, peanuts, tree nuts, soy, wheat, sesame, gluten, corn, yeast, and animal derivatives. The K-CAPS^® capsules are certified free from an extensive list of allergens and substances. Similar documentation is on file for each ingredient.

Pharmaceutical-grade ingredients are manufactured and tested to standards set by pharmacopeias such as USP, European Pharmacopoeia, or Japanese Pharmacopoeia. These standards specify minimum purity, maximum allowable impurities, and required testing methods. Food-grade ingredients meet FDA safety requirements but may not be held to the same specific identity and purity benchmarks. Several FlowVeda^® ingredients meet pharmacopeial standards. Vitamin B6 is manufactured to USP specifications. L-Theanine is manufactured to Japanese Pharmacopoeia (JP2000) specifications.

Pesticide testing is managed at the supplier level. Botanical ingredients such as KSM-66^® Ashwagandha, which is organically cultivated, undergo pesticide screening as part of organic certification. Residual solvent testing is performed for ingredients where solvents are part of the extraction process. Vitamin B6 complies with ICH Q3C, USP, and European Pharmacopoeia standards. L-Theanine confirms residual solvents below 5,000 ppm. All documentation is on file.

Raw materials are received, quarantined, and inspected before being released for production. Storage follows cGMP requirements for temperature, humidity, and environmental controls. Each ingredient has supplier-specified storage conditions. For example, L-Theanine is stored in sealed containers away from moisture, and KSM-66^® Ashwagandha extract is packed in tightly sealed HDPE drums.

If any result falls outside specification, the batch is not released. Vitaquest’s Quality Assurance Department investigates and documents all deviations. A batch that does not meet specifications is held. No product reaches distribution without full QC sign-off from the quality control supervisor.

The finished product is tested for five categories: Total Plate Count, Yeast and Mold, Salmonella, E. coli, and S. aureus. Testing uses USP methods. All five tests must pass before a batch is released. Results for the current batch are documented in the COA.

Every ingredient supplier tests for four heavy metals: Lead, Arsenic, Cadmium, and Mercury. Limits follow United States Pharmacopeia (USP) standards and vary by ingredient. For example, Folate (5-MTHF Calcium) is tested to limits of Lead below 3.0 mg/kg, Arsenic below 1.0 mg/kg, Cadmium below 1.0 mg/kg, and Mercury below 0.1 mg/kg. All results for every ingredient in the current batch are within specification. Full heavy metals data is available in the batch COA upon request.

BOVMTDPC stands for Based On Verified Manufacturing, Testing, Documentation, and Process Controls. It is a verification method recognized under FDA regulation 21 CFR 111.75(d)(1). When an ingredient carries this designation, it means the manufacturer evaluated the ingredient through the supplier’s own testing documentation, manufacturing controls, and process certifications, and determined that the documentation was strong enough to confirm identity, purity, and potency without additional redundant testing at the manufacturing facility. This is standard practice across the dietary supplement industry.

The COA shows the product name, batch and lot numbers, manufacture and expiration dates, and the contract manufacturer. For each ingredient, it lists the label claim (what the label says), the specification range (the acceptable range), the tested result (what was actually measured), the test date, and the test method. Below the ingredients, you will find microbial testing results and physical testing results. At the bottom, the QC approval confirms that the batch met all specifications and was released.